The rear suspension of the car is dependent, it includes a guide device, elastic elements and devices that dampen body vibrations.
The rear axle beam is pivotally connected to the body by means of torque rods - two lower 3 (Fig. 1) and two upper 9 longitudinal and one transverse rod 1.
Replace the fluid in the power steering system if it is excessively contaminated
The manufacturer does not give clear recommendations on the frequency of changing the fluid in the hydraulic system, so we recommend replacing it after six years, regardless of condition
The brake mechanism of the rear wheel is drum, with automatic adjustment of the gap between the pads and drums
The front axle of the Chevrolet Niva is a main gear and a differential installed in one crankcase
The hydraulic unit structurally consists of an electronic control unit (ECU) and a hydraulic modulator containing electromagnetic valves (EMC), a return pump and a return pump electric motor (EVN)
Longitudinal rods are removed for replacement if they are damaged or to replace worn rod hinges
You will need: micrometer, caliper, ruler.
Pre-soak the soot with kerosene. Mechanical cleaning of soot is possible
