You will need: glass gluing kit, steel string, sharp knife

Scheme of windshield installation: 1 - cladding; 2 - windshield edging; 3 - windshield; 4 - glue line; 5 - front pillar; 6 - front cross member of the roof panel; 7 - adjusting wedge; 8 - dimensions of the glue bead before gluing the glass

Windscreen installation diagram

Scheme of sidewall glass installation: 1 - sidewall glass edging; 2 - side window glass; 3 - glue roller before glass gluing; 4 - sidewall window frame

Side glass installation diagram

Scheme of installation of rear door glass: 1 - tailgate; 2 - edging the rear window glass; 3 - glue line; 4 - rear window glass; 5 - tailgate panel; 6 - dimensions of the adhesive bead before glass installation

Rear glass installation diagram

Windshield glass replacement

Lower the front door windows.

How to replace windows on a Chevrolet Niva

Remove the A-pillar upholstery.

How to replace windows on a Chevrolet Niva

Remove the screws securing the instrument panel insert

How to replace windows on a Chevrolet Niva

Remove the instrument panel insert.

How to replace windows on a Chevrolet Niva

Remove the windshield trim and wiper arms (see "Removing, installing and repairing the windshield wiper").

How to replace windows on a Chevrolet Niva

Remove the windscreen surround and clean thoroughly. If the edging is damaged or has lost elasticity, replace it

Remove the windshield trim trim

It is convenient to use a steel string to remove glued glass.

How to replace windows on a Chevrolet Niva

Poke the glue line with a pointed tool (such as an awl) and pull the string through the hole.

How to replace windows on a Chevrolet Niva

For the convenience of further work, wrenches can be fixed at the ends of the string, which will serve as handles.

How to replace windows on a Chevrolet Niva

Saw the glue line around the entire perimeter of the glass with a string (you will need an assistant to perform this operation)

How to replace windows on a Chevrolet Niva

Remove the glass from the car

Cut off the old seam, leaving a thin layer of adhesive (1.0–2.0 mm).

How to replace windows on a Chevrolet Niva

Install the frame on the new glass.

How to replace windows on a Chevrolet Niva

Apply the activator/cleaner to the edge of the glass and the window opening around the perimeter.

How to replace windows on a Chevrolet Niva

Apply a primer around the perimeter of the glass

How to replace windows on a Chevrolet Niva

Apply primer to the window opening.

Do not apply primer on the remnants of old glue!

How to replace windows on a Chevrolet Niva

Apply glue evenly on the window opening (layer thickness 0.5 cm)

How to replace windows on a Chevrolet Niva

Apply glue around the perimeter of the glass.

Install the glass assembly with the edging on the car, using the adjusting wedges to set uniform gaps around the perimeter of the window.

How to replace windows on a Chevrolet Niva

Press and secure the glass with masking tape to prevent it from moving downwards.

The polymerization period of the glue is at least two to three hours.

During this time, the car must not be exposed to any external influences.

Even abrupt closing of the door can lead to an increase in air pressure in the passenger compartment and, as a result, to tear off the glass.

It is advisable to start operating the car after gluing the glass no earlier than 24 hours

Replace tailgate glass and sidewall glass in the same way.