The steering mechanism is removed for repair or replacement, replacement of steering rods, as well as to replace damaged protective covers

If the vacuum booster does not work when checking the brakes, it should be replaced

The stabilizer bar is secured through rubber pads on the front subframe

You will need wrenches "16", "19", "21", TORX 130, wheel bolt wrench, ball joint extractor.

Bleeding (bleeding) the hydraulic system of the power steering is necessary after any work related to the depressurization of the system (replacement of the pump or pipelines)

Compression (pressure at the end of the compression stroke) in the cylinders is the most important indicator for diagnosing the condition of the engine without disassembling it

The immobilizer coil is put on a piece of pipe (welded to the steering column pipe) in which the ignition switch is installed

Renault Logan cars are fitted with rack and pinion steering

Checking and adjusting the wheel alignment is necessary to ensure good vehicle stability and handling, as well as uniform tire wear during its operation

We remove the air filter for replacement, as well as for access to other parts and components of the power plant