• Home
  • Systems
    • Renault Logan
    • Toyota Camry
    • UAZ-Patriot
    • Niva VAZ-21213
    • Kia Magentis
    • Lada-Largus
    • Niva Chevrole
    • Mazda 3
  • VAZ
    • Gazelle
    • GAZ-3110
  • Search

Design, replacement of the water pump of the ZMZ-40524 engine

The water pump is a centrifugal type, with an electromagnetic fan drive clutch, mounted on the chain cover, the coolant is supplied by the pump to the cylinder block

The design of the engine lubrication system ZMZ-40524

The lubrication system is combined, with oil supply to rubbing surfaces under pressure and splashing and automatic oil temperature control with a thermal valve

Dismantling the driveline and replacing the crosspieces of the Gazelle car

Removal and inspection of the driveline was discussed in the article - “Inspection and removal of the cardan shaft of the Gazelle car”

Malfunctions of the cardan shaft are discussed in the article - “Design Features of the Cardan Drive of a Gazelle Car”

Inspection and removal of the cardan shaft of a Gazelle car

Inspection, check and lubrication of the driveline

First of all, inspect the driveshafts and forks - cracks, dents or other deformations are unacceptable

  1. Design features of the driveline of a Gazelle car
  2. Scheme of the COURT ZMZ-405 with DMRV HFM-4.7 0280218037 "BOSCH" (Germany)
  3. Maintenance of the fuel system GAZelle Next
  4. Removal and installation of the GAZelle Next air filter
  5. Adjusting the valve clearances of the ZMZ-402 engine
  6. Ignition timing adjustment ZMZ-402
  7. How to remove and install the gearbox of a Gazelle car
  8. How to disassemble and assemble the gearbox of a Gazelle car
  9. Removal and installation of the intermediate shaft of the ZMZ-406 engine
  10. Assembly description ZMZ-402
  11. Repair of the connecting rod and piston group ZMZ-402
  12. How to check and adjust the angles of the front wheels of a Gazelle car
  13. Replacing and adjusting the bearings of the rear wheels of a Gazelle car
  14. How to remove and install the hood and its lock of a Gazelle car
  15. Removing the rear wheels and axle shafts of the Gazelle car

Page 1 of 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Design and verification of the thermal valve for supplying engine oil ZMZ-405
  • Subassembly of the connecting rod and piston group of the ZMZ-40524 engine
  • Removal and installation of the ZMZ-406 engine generator belt
  • Changing the oil and oil filter of a Gazelle car engine
  • Removing the clutch discs of a Gazelle car