To remove the power steering radiator, remove the air filter, article - "Replacing the air filter"
Removing the front bumper, article - "How to remove the bumper"
We substitute a container for draining the fluid under the tubes of the power steering radiator.
Use a Phillips screwdriver to loosen the hose clamp on the radiator tube
Remove the hose from the tube. So that there are no leaks from the hose, we plug it with improvised material
Remove the hose from the other radiator tube and insert the plug into it
Using a 10 key, unscrew the nut of the bracket for fastening the hydraulic booster radiator tubes to the bracket
Remove the bracket.
Split rubber rings are installed under the bracket on the tubes.
With a 10 head with an extension, unscrew the two upper mounting bolts
We unscrew the two bolts of the lower radiator mounting to the front bumper beam bracket
Remove the power steering radiator
We install the radiator in the reverse order.
Fill fluid into the power steering reservoir and bleed the system, article - "Replacing Power Steering Fluid"
