We remove the sensors of the engine management system for inspection or for replacement

The car uses DC electrical equipment with a nominal voltage of 12 V

You will need: 10 wrenches, Phillips and flat-blade screwdrivers, ohmmeter (autotester), test lamp

If a constant knock of valves is heard when the engine is idling, the hydraulic bearings of the drive levers are faulty. Replace defective hydraulic bearings

The vehicle is equipped with heater 12 (Fig. 1) of liquid type, combined with the engine cooling system. The heater radiator 1 (Fig. 2) is placed in a plastic casing installed in the central part of the instrument panel

The damper is located inside the front of the block head on the left and attached to it from the outside with two bolts