We remove the tips of the spark plugs together with the high-voltage wires, the ignition coils (you can only disconnect the connectors by leaving them on the valve cover), the throttle cable and, having disconnected the wires from the sensors of the lubrication and cooling systems, remove the wiring harness from the brackets of the head cover .

  1. Removal and installation of the cylinder head of the ZMZ-406 engine
  2. Installation of injection pump for diesel D-245
  3. Removal and installation of chain tensioners ZMZ-409
  4. Replacement of chains and gears of the gas distribution mechanism ZMZ-409
  5. Checking and replacing the idle speed regulator ZMZ-406
  6. Features of the K-151 carburetor
  7. Removal and installation of the intermediate shaft ZMZ-406
  8. Replacing the crankshaft oil seals of the VAZ-21114 engine
  9. Checking the condition and replacing the VAZ-21114 engine generator drive belt
  10. How to replace the camshaft oil seal of the VAZ-21114 engine
  11. Removal and installation of the oil receiver of the VAZ-21114 engine
  12. Replacing the cuffs of the camshafts of the VAZ-21126 engine
  13. Replacing the gasket of the collector VAZ-21126
  14. Removal and disassembly of the oil pump of the VAZ-21114 engine
  15. Removal and installation of the throttle assembly of the VAZ-21114 engine
  16. Removal and installation of the camshaft of the VAZ-21114 engine
  17. How to check and replace the ZMZ-409 synchronization sensor

Page 4 of 182