Disassembling the carburetor K-151, K-151D
It is not recommended to unscrew the screws securing the throttle valves on the axles and remove the dampers unless absolutely necessary, as their displacement can lead to jamming of the dampers in the channels
You will need: a hex wrench “6”, heads “12”, “13”, “14”, a small chisel, a hammer
Drain the cooling system
Before disconnecting hoses and electrical wires, it is recommended to mark them so as not to confuse them during assembly
If there are signs of oil leakage through the camshaft seals, first check if the crankcase ventilation system is clogged and if its hoses are pinched, repair if necessary
Camshafts are replaced in the following cases:
The ZMZ-402 engine power system includes:
You will need:
