The minimum allowable thickness of the friction linings of the brake pads is 1.5 mm. Replace pads in the following cases:

The rear suspension of the car is dependent, it includes a guide device, elastic elements and devices that dampen body vibrations.

The rear axle beam is pivotally connected to the body by means of torque rods - two lower 3 (Fig. 1) and two upper 9 longitudinal and one transverse rod 1.

To do the job, we need: a bottle of carburetor flushing fluid; suitable hose 0.5 meters; receiver gasket; head and ring key for 13; key for 10; flat and Phillips screwdriver; wires with lugs for connecting to the injector

The transfer box is designed to change the torque in magnitude and distribute it between the front and rear drive axles

The rear axle gearbox is removed for replacement or repair

When repairing the electrical equipment of a car, sometimes you have to check all the wiring

To do this, you need to imagine how it passes through the body