The half-axle assembly with the bearing is replaced when the noise from the rear wheels of the car is increased compared to normal, both when driving in a straight line and when cornering
You will need: wrenches "for 13", "for 17", "for 27", a wrench for wheel nuts.
Preparing the car for the task
The power system includes elements of the following systems:
- - fuel supply system, including fuel tank 4 (Fig. 1), electric fuel pump 2, pipelines 5, 6 and 13, hoses 12, fuel rail 8 with injectors 7 and fuel pressure regulator 9, as well as fuel filter 11;
If oil leakage is detected from under the front crankshaft oil seal, it must be replaced
Replacing the rear brake pads
The minimum allowable thickness of the friction linings of the brake pads is 1.5 mm.
Replace pads in the following cases:
The rear suspension of the car is dependent, it includes a guide device, elastic elements and devices that dampen body vibrations.
The rear axle beam is pivotally connected to the body by means of torque rods - two lower 3 (Fig. 1) and two upper 9 longitudinal and one transverse rod 1.
Gearbox - mechanical, with manual shifting, has five forward gears and one reverse gear, all forward gears are synchronized
