Drain the oil from the transfer case ("Changing the oil in the transfer case")

Disconnect the appropriate cardan shaft from the transfer case

Removing the front bumper of a Chevrolet Niva car is not difficult

The minimum allowable thickness of the friction linings of the brake pads is 1.5 mm. Replace pads in the following cases:

The rear suspension of the car is dependent, it includes a guide device, elastic elements and devices that dampen body vibrations.

The rear axle beam is pivotally connected to the body by means of torque rods - two lower 3 (Fig. 1) and two upper 9 longitudinal and one transverse rod 1.

To do the job, we need: a bottle of carburetor flushing fluid; suitable hose 0.5 meters; receiver gasket; head and ring key for 13; key for 10; flat and Phillips screwdriver; wires with lugs for connecting to the injector

The transfer box is designed to change the torque in magnitude and distribute it between the front and rear drive axles