We replace the rear wheel pads in case of damage, oiling and wear of the pads to a thickness of less than 1 mm.
The drum is replaced if it is damaged, cracked, and the working surface is worn out up to a diameter of more than 283 mm. We replace all four rear wheel pads at the same time.
The ignition lock bracket is fixed to the steering column with two bolts, the heads of which are cut off at a certain tightening torque
On a Gazelle car, steering can be installed both without power steering and with power steering
The piston of the 1st cylinder is set to the position of the top dead center (TDC) of the compression stroke so that when carrying out work related to the removal of the timing chains, the installation of the gas distribution phases is not disturbed
Inspection, check and lubrication of the driveline
First of all, inspect the driveshafts and forks - cracks, dents or other deformations are unacceptable