Usually, the head gasket is replaced with the following damage:

• - Gas breakthrough into the cooling system;

Sooner or later, the bulbs in the rear lights burn out.

It would seem that it would be easier: to take a new lamp, suitable for the size of the cap and voltage, and install it in place of the burned-out lamp

The scheme for a more detailed study consists of two parts

Shock absorbers are used to dampen suspension vibrations

Protruding from the shock absorbers, the upper parts of the rods are protected from dirt by rubber caps.

A feature of the ZMZ-40524 engine ignition system is the presence of four separate ignition coils installed directly on the spark plugs, instead of two separately installed coils serving two engine cylinders each

Initial alternator express test can be performed directly on the vehicle

The ignition lock bracket is fixed to the steering column with two bolts, the heads of which are cut off at a certain tightening torque

On the ZMZ-402 engine, an ignition distributor sensor (1908.3706) is installed - contactless, with a sensor (generator) of control pulses and built-in vacuum and centrifugal ignition timing controllers

When increasing the force on the brake pedal, it is necessary to check the performance of the vacuum booster

Schemes of ZMZ-405 engine control systems may differ depending on which mass air flow sensor is installed