The fuel module is removed to replace the elements of the fuel module, as well as when replacing the fuel tank

We prepare the car for the task and reduce the pressure in the fuel system, as described in the previous article

Disconnect the negative battery terminal

Toyota Camry fuel module removal and disassembly

Remove the rear seat cushion

Toyota Camry fuel module removal and disassembly

Toyota Camry fuel module removal and disassembly

Pry off with a screwdriver and remove the cover of the fuel module hatch

Toyota Camry fuel module removal and disassembly

Disconnect the wiring harness block from the fuel module by depressing the latch

Toyota Camry fuel module removal and disassembly

Toyota Camry fuel module removal and disassembly

Toyota Camry fuel module removal and disassembly

Remove the locking bracket of the fuel line coupling and pull the coupling out of the opening of the fuel module

Toyota Camry fuel module removal and disassembly

We unscrew the eight bolts (the bolts must be unscrewed carefully so as not to drop)

Toyota Camry fuel module removal and disassembly

Remove the pressure ring

Toyota Camry fuel module removal and disassembly

Remove the module from the fuel tank opening.

Remove the module carefully, turning it so as not to damage or displace the float of the fuel gauge sensor

Drain the fuel from the module into a container prepared in advance

Toyota Camry fuel module removal and disassembly

Remove the fuel gauge sensor from the fuel module, for this:

Disconnect the fuel level sensor wire block from the fuel module flange

Toyota Camry fuel module removal and disassembly

Unfasten the latch and remove the sensor from the fuel module body

Toyota Camry fuel module removal and disassembly

Toyota Camry Fuel Module Removal and Disassembly

Remove the retaining rings from the guide pins of the fuel pump holder and remove both fingers from the holes in the holder

Toyota Camry fuel module removal and disassembly

Toyota Camry fuel module removal and disassembly

Squeeze the clamps of the bracket and remove the fuel pump holder from the fuel module housing

Disconnect the upper fuel pump wiring harness from the fuel module flange

Toyota Camry fuel module removal and disassembly

Release the clamps and remove the fuel pump from the fuel module housing

Disconnect the block of wires from the fuel pump by squeezing the clamps

Remove the O-ring from the fuel pump

Install the fuel pump in reverse order

Replace the pump sealing ring with a new one

To remove the fuel pressure regulator

Toyota Camry fuel module removal and disassembly

Pry off with a screwdriver and remove the fuel pressure regulator from the fuel module body

Toyota Camry fuel module removal and disassembly

Install the regulator in reverse order

Toyota Camry Fuel Module Removal and Disassembly

Before installing the regulator, we replace the o-rings with new ones and lubricate with grease

Replacing the fuel filter

It is recommended to replace the fuel filter after eight years of operation or after 80,000 km of vehicle mileage

Based on operating experience, it is necessary to replace the fuel filter after 30,000 km of vehicle run

Toyota Camry fuel module removal and disassembly

Release the two latches and remove the bracket from the fuel module body

Toyota Camry fuel module removal and disassembly

Installing a new filter, assembling the fuel module and installing it in place

After installing the module, we check the fuel system for leaks