Remove the rear wheel
Remove the rear suspension brace assembly.
Disconnect the disc brake caliper.
Remove the rear disc.
Disconnect the skid control sensor wire.
Remove the rear wheel hub.
Remove the mounting bolt and nut and remove the rear suspension arm from the rear suspension hub knuckle
Remove the mounting bolt and nut and remove the rear suspension arm from the rear suspension hub knuckle
When unscrewing the bolt, fix the lock nut of the rear suspension arms.
Remove the 2 mounting bolts and nuts and remove the rear suspension hub knuckle from the rear shock absorber strut
Installing the hub knuckle
Install the rear suspension hub knuckle with 2 bolts and nuts. Tightening torque: 255 Nm.
Attach the rear suspension arm to the rear suspension hub knuckle with a bolt and nut, temporarily tightening the bolt.
Insert the bolt from the front of the vehicle and rotate the bolt as you install the nut.
Attach the rear suspension arm to the rear suspension hub knuckle with a bolt and nut, temporarily tightening the bolt.
Install the rear wheel hub.
Install the skid control sensor wire.
Install the rear disc.
Install the disc brake caliper.
Temporarily tighten the rear suspension assembly brace bolts.
Stabilize the suspension.
Fully tighten the #1 rear suspension arm mounting bolts (fig. 4).
Fully tighten the rear suspension arm mounting bolts
Fully tighten the bolts of the rear suspension brace assembly
Install the rear wheel. Tightening torque: 103 Nm.
Inspect and adjust rear wheel alignment.
Check ABS speed sensor signal
