The stabilizer bar is secured through rubber pads on the front subframe
The ends of the stabilizer bar are connected to the front suspension arms of the car
This is how the details of attaching the stabilizer bar to the front suspension arm look like
You will need - keys "for 10", "for 13", TORX T40, socket head "for 18".
Remove the anti-roll bar bolt nut while holding the bolt from turning.
Remove the lower silent block
Remove the rubber bushing and remove the stabilizer bar bolt.
Remove the rear subframe mounting bolt.
If you unscrew both rear bolts of the subframe, be sure to install stops under it
Remove the stabilizer bar bracket nut
Pry with a screwdriver and remove the stabilizer bar bracket
Remove the rubber pad.
Replace damaged or worn cushions and silent blocks with new ones
Similarly, remove the second stabilizer bar mounting bolt and mounting bracket
Remove the stabilizer bar from the vehicle.
Install parts in reverse order of removal
