Clutch fluid needs to be changed after 2 years
We pump the hydraulic drive when replacing the working fluid, as well as to remove air from the system that got into it during the repair or replacement of individual components
Solenoid nozzle (0280150560В or ZMZ DEKA IA9Z61) - an electromechanical valve that works on the principle of an electromagnet
For gluing glass, a special set and a “gun” device for squeezing glue out of the tube are used
The head of the block can be removed with the intake pipe and exhaust manifold.
If the head of the block is removed from the engine installed on the car, you must first perform the following operations:
Checking the level and adding fluid to the power steering reservoir
The reservoir is located on the left side of the engine compartment, next to the washer reservoir
Loosen bolt 1 two to three turns
Unscrew the adjusting bolt 2, loosen the belt tension and remove it
A typical electrical circuit may include a main electrical element, various switches, relays, electric motors, fuses, fuses or circuit breakers, wiring related to this element, and connectors used to connect the main element to the battery and ground bodies
