We examined the disassembly of the axle gearbox in the article - Disassembly for the repair of the rear axle of a Gazelle car
In this article, we will consider how to properly assemble and adjust the rear axle gearbox of a Gazelle car.
The Gazelle car heater consists of a plastic casing in which a radiator is installed, two fans mounted on the motor shaft, upper, central and lower dampers and a control panel with three levers and switches
The ignition lock bracket is fixed to the steering column with two bolts, the heads of which are cut off at a certain tightening torque
Before disconnecting hoses and electrical wires, it is recommended to mark them so as not to confuse them during assembly
Four fuel injectors are installed in the intake pipes of the cylinders
Remove the steering column lining
Disconnect the wires from the brake light switch
In the cab of a car with three rows of seats, an additional heater is located on the floor behind the passenger seat (or under it)
