ZMZ-402 engines are installed on Volga, UAZ, Gazelle cars
The engines have proven themselves well during operation
An external sign of wear on the valve stem seals is the short-term appearance of blue smoke from the exhaust pipe after starting the engine, as well as when braking the engine after a long drive under load
Four fuel injectors are installed in the intake pipes of the cylinders
Remove
Remove fan drive belt
Loosen the two bolts securing the generator to the bracket
High voltage wires are made of PV PPV wire with a diameter of 8 mm
The piston of the 1st cylinder is set to the position of the top dead center (TDC) of the compression stroke so that when carrying out work related to the removal of the timing chains, the installation of the gas distribution phases is not disturbed
On the ZMZ-402 engine, before removing the filter, drain the oil from it by unscrewing the plug
Unscrew the emergency oil pressure switch at the bottom of the filter
