Removing and installing water pump

The water pump is removed for access to other parts, as well as for its repair or replacement if noise occurs during operation, the level of which exceeds the usual level and which appears when a large radial play of the pump shaft is formed

You will need: wrenches "for 10", "for 12", "for 14", heads "for 15", "for 19", a hammer

Remove the cylinder head

K-88A carburetor operation in different modes

Idle Mode

The carburetor has two independent idle systems, the same for each chamber

We replace the timing belt every 75,000 km or if it shows signs of wear and undercutting of teeth, cracks, delamination of rubber and fabric base

Remove

Remove fan drive belt

Loosen the two bolts securing the generator to the bracket

You will need: keys "for 10", "for 13", "for 14", "for 17", "for 19", "for 21", "for 22", "for 36" (or a special key for the crankshaft pulley fastening nut, in the absence of such a key, you can use a gas wrench),