KIA RIO engine control sensors

Ignition timing

Apply the parking brake.

Start the engine and warm it up to operating temperature.

We remove the generator for replacement or repair

Disconnect the cable from the negative battery terminal

The vehicle must be parked on a flat, level surface.

If, as a result of the check, play was found in the front hub bearings, then the bearings in both front hubs must be replaced

Removing the cylinder head

Drain the coolant from the cooling system and disconnect the upper radiator hose

The negative ground electrical system has an operating voltage of 12 volts

The electrical equipment of the vehicle is protected from damage by electrical overload using fuses

Dismantle the automatic transmission in a place protected from dust to prevent contamination of the transmission parts

The vehicles use a hydraulically actuated service brake system.

Service brake system with hydraulic drive, and parking system with cable

A transmission fluid pressure test is performed to determine the condition of the hydraulic components and whether there are any leaks