Preparing the car for work. Disconnect the negative battery terminal.
If we do the work without a lift, then we slow down the car with a parking brake
We remove the bumper for various types of repairs. When repairing the bumper itself, also for approaching the radiators, when replacing the engine cooling fluid
Disconnect the negative battery terminal
After turning off the power, wait at least 1 minute for the airbag activator capacitor to discharge
Preparing the car for work.
Open the trunk lid of the car. Disconnecting the negative battery terminal
Renault Megane 2 is equipped with electric power steering.
Steering is adjustable for rake and reach
Remove the hood for replacement or repair
To remove the hood you will need tools: wrenches 10, 32, TORX T30, flat blade screwdriver
In this article, we will consider the replacement of sensors in the engine management system
Remove the generator from the engine
We discussed the removal and installation of the generator in the article - Renault Megane II generator set
Vibrations are caused by a sequence of pulses. In the case of vibrations related to the speed of movement, these impulses are generated by an imbalance of some element rotating with the wheel, which is transmitted to the corresponding wheel suspension
To prevent breakage of the contact disc under the steering wheel, the following instructions should be observed:
