The body of the Renault Megan 2 car is of a supporting structure, such as a four-door sedan, a five-door hatchback or a five-door station wagon.

The body consists of a frame and attachments.

Put the car on a two-post lift

Disconnect the battery

Preparing the car for work. We prepare the TORX T20 key, a screwdriver

Refilling is carried out through the appropriate hole (Fig. 1).

We remove the clutch pedal when a creak appears when the pedal is moved due to wear of the plastic bushings

To prevent breakage of the contact disc under the steering wheel, observe the following instructions:

To remove the lining of the floor tunnel, you will need a TORX T20 key, screwdrivers, side cutters.

Disconnect the negative battery terminal

The subframe is the power unit of the front suspension, to which the lower arms of the front suspension, the steering gear, the lower support of the power unit are attached

Put the car on a two-post lift

The hydraulic block or hydraulic distributor, receiving signals from the electronic control unit, switches channels in the control valve block and controls the clutch engagement pressure