We remove the lining of the floor tunnel when dismantling the instrument panel, removing the parking brake lever

The hub bearing is replaced when play occurs

You will need a bearing puller, circlip puller, barb, hammer

The front wheel drives consist of external and internal constant velocity joints (CV joints) connected by shafts

Checking the fuel pressure in the fuel rail of the engine is only possible with a pressure gauge with a set of adapters for connecting to the fuel pipeline

You will need side cutters

Remove steering gear

Before lifting the rear of the vehicle, engage first gear and chock the front wheels

We replace the chain and gear of the oil pump drive as a result of wear. We also remove the drive chain and sprocket during engine overhaul

We remove the oil pump when overhauling the engine, when replacing the circuit and when repairing the pump itself

Let's look at how to replace the voltage regulator and rectifier unit

According to the manufacturer's recommendation, the accessory drive belt should be replaced after 4 years of operation or after 60 thousand kilometers (whichever comes first)