If the oil leak from under the cylinder head cover could not be eliminated by tightening the cover bolts, replace its gasket

The front wheel drives consist of external and internal constant velocity joints (CV joints) connected by shafts

The instrument panel is a non-separable structure consisting of a steel frame filled with polymer foam and covered with a polymer film

The evaporative emission canister can be removed for inspection or replacement if there is a persistent smell of gasoline caused by a canister leak or if the canister purge valve fails

The hub bearing is replaced when play occurs

You will need a bearing puller, circlip puller, barb, hammer

With the minimum allowable thickness of the friction linings of the brake pads, the size measured by the diameter of the pads installed in the brake mechanism with the clearance adjuster reset is 179.4 mm for a car with a 1.4 liter engine and 202.45 mm for vehicles with 1.6 l engine

Let's consider the removal process using the example of a car with a complete set with a K7J and K7M engine, with a K4M engine, the difference is only in the generator mounting

The stabilizer bar is secured through rubber pads on the front subframe

Remove the steering knuckle to replace or repair the front suspension

With a certain skill, silent blocks can be replaced directly on the car by unscrewing the bolts securing the beam brackets to the body, and then removing the mounting brackets from the beam, but it is more convenient to do this work on the removed rear suspension beam