• Home
  • Systems
    • Renault Logan
    • Toyota Camry
    • UAZ-Patriot
    • Niva VAZ-21213
    • Kia Magentis
    • Lada-Largus
    • Niva Chevrole
    • Mazda 3
  • VAZ
    • Gazelle
    • GAZ-3110
  • Search

How to replace the camshaft VAZ-2123

The camshaft is replaced in the following cases:

  • - the pressure in the engine lubrication system has dropped

Disassembly and assembly of the cylinder head VAZ-2123

If you need to repair the cylinder head of the engine installed on the car, remove it as described in the article "How to replace the VAZ-2123 cylinder head gasket"

Design features of the cylinder head VAZ-21126

Cylinder head common to four cylinders, cast aluminum alloy, with tent-shaped combustion chambers

How to replace the VAZ-2123 chain damper

The damper is located inside the front of the block head on the left and attached to it from the outside with two bolts

Balancing of parts of the crank mechanism D-245

After repairing the crankshaft, as well as the flywheel, clutch or pulley installed on it, it is necessary to balance them

How to replace the cylinder head cover gasket VAZ-2123

If the oil leak from under the cylinder head cover could not be eliminated by tightening the cap fastening nuts, replace its gasket

Checking and replacing the idle speed controller of the VAZ-21114 engine

To check and remove the idle speed controller (IAC), you need to remove the throttle assembly completely (see "Removing the throttle assembly") or partially

Page 5 of 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

Select your language

  • Русский (Россия)
  • Español (España)
  • English (UK)
  • Қазақша (kk-KZ)
  • Deutsch (Deutschland)
  • Українська (Україна)
  • How to remove and install ABS sensors on a Chevrolet Niva car
  • Removal and installation of ABS units of the car Lada Largus
  • How to replace the camshaft Niva Chevrolet
  • Diagrams of car systems Mazda 3
  • Automatic transmission control with 1AZ-FE engine Toyota Camry