Remove the heater valve if there is a coolant leak

We remove the auxiliary heater electric pump to approach the tap during replacement, and in case of a malfunction of the pump itself

If the sensor fails, the engine starts poorly, especially after a long period of inactivity.

Poor throttle response, increased fuel consumption. Fault light on

Before buying a bearing, you need to look at its catalog number

The table shows the bearing numbers according to the spare parts catalog and the numbers according to the diagram

The pump is usually changed when extraneous noise appears in the pump area, as well as in case of failures and a decrease in engine power

The main brake cylinder with a two-section reservoir and an emergency drop in brake fluid level sensor is attached to the vacuum booster

The intake system consists of an intake pipe and a receiver, cast from aluminum alloy

On engines ZMZ-40522 and ZMZ-40524, a catalytic converter is installed in the exhaust gas system

An oil cooler is included in the system to cool the oil.

The oil cooler is installed in front of the radiator of the engine cooling system and is connected to the engine lubrication system using rubber hoses

The hood is removed when dismantling the engine, removing the cylinder head and other types of work

The rear suspension is made on two longitudinal leaf springs with two hydraulic shock absorbers