We replace the chain and gear of the oil pump drive as a result of wear
We also remove the chain and drive sprocket during engine overhaul
To complete the task, you will need: heads for 13, 16, 18, 10, TORX E14, a square wrench, a flat-blade screwdriver, a retainer for setting the TDC, a camshaft retainer, engine oil, an oil drain container.
We perform work on a lift or a viewing ditch.
Drain the oil from the engine crankcase - (Replacing the oil and filter of the Renault Megan 2 engine)
Remove the accessory drive belt - (Replacing the accessory drive belt Renault Megane 2)
Remove the timing belt - (timing Renault Megan-2 engine 2.0 (keyed pulley))
Removing the engine sump - (Removing and installing the Renault Megane 2 sump)
Remove the oil pump - (Repair of the Renault Megan 2 oil pump)
Remove the crankshaft gear
We unscrew the bolts of the crankshaft front cover
Pry off the front cover of the crankshaft with a screwdriver
Remove the cover
Remove the chain
Remove the oil pump drive sprocket
Install parts in reverse order
Before installing the front cover of the crankshaft, we clean the mating plane of the cylinder block
We clean the cover from the remnants of the old sealant.
Replacing the oil seal.
We apply sealant to the mating surface of the cover and install the cover
