With the minimum allowable thickness of the friction linings of the brake pads, the size measured by the diameter of the pads installed in the brake mechanism with the clearance adjuster reset is 179.4 mm for a car with a 1.4 liter engine and 202.45 mm for vehicles with 1.6 l engine
The idle speed controller maintains the set idle speed of the engine at wide throttle during start-up, warm-up and when the load changes when auxiliary equipment is turned on
If the engine power drops, there is increased noise, or howls are periodically heard during the operation of the fuel pump, then the fuel pump is most likely out of order
We remove the power steering pump for replacement or repair
You will need: socket head "13", pliers, key for pipelines "17".
The correct position of the brake pedal in the free state and pressed all the way (pedal stroke) is one of the criteria for checking the health of the brake system
Let's look at how to replace the voltage regulator and rectifier unit
To compensate for the thermal expansion of the valve, the gap between the end of the valve stem and the adjusting bolt screwed into one of the arms of the rocker arm of the valve actuator is structurally set
