According to the manufacturer's recommendation, the coolant should be replaced after 6 years of operation or 90 thousand kilometers, whichever comes first

We remove the subframe to dismantle the gearbox and other components of the power unit and front suspension

The anti-lock braking system (ABS) consists of an electronic control unit (ECU), wheel speed sensors, a hydraulic unit 1 (fig. 1) with hydraulic solenoid valves, an electrically driven return pump and a warning light 4 in the instrument cluster

The brake drum is removed to replace it if the working surface is damaged or worn (the maximum allowable diameter of the drum of a car with a 1.4 liter engine is 181.25 mm, with a 1.6 liter engine - 204.45 mm), as well as for control state of brake mechanisms, replacement of brake pads and working cylinders

With the minimum allowable thickness of the friction linings of the brake pads, the size measured by the diameter of the pads installed in the brake mechanism with the clearance adjuster reset is 179.4 mm for a car with a 1.4 liter engine and 202.45 mm for vehicles with 1.6 l engine

The idle speed controller maintains the set idle speed of the engine at wide throttle during start-up, warm-up and when the load changes when auxiliary equipment is turned on