The hydraulic unit structurally consists of an electronic control unit (ECU) and a hydraulic modulator containing electromagnetic valves (EMC), a return pump and a return pump electric motor (EVN)
Entfernen Sie den Kraftstofftank zum Spülen und Reparieren
Es empfiehlt sich, den Kraftstofftank mit einer minimalen Kraftstoffmenge auszubauen
The steering mechanism is removed for repair (we recommend that the mechanism be repaired in a specialized workshop) or replacement
If during operation there are traces of brake fluid leakage on the brake drum and the inner side of the wheel, replace the slave cylinder
The steering wheel is removed when removing the steering column and for other repairs
Remove the key from the ignition.
When the chain tensioner shoe is worn, the tensioner's response range becomes insufficient to restore chain tension. The chain starts to rattle while the engine is running. In this case, replace the shoe
If the pump fails, replace the assembly, as its repair requires the use of special equipment and tools
According to the recommendation of the factory, the air filter element is changed - every 30,000 km of run
An anti-theft system (immobilizer) APS-6 is installed on the car
In the niches of the front wheels there are plastic wheel arch liners that protect the inner surfaces of the wings from dirt. Fenders consist of two parts
If the clutch does not fully disengage (“drives”) when the pedal is pressed all the way, which is accompanied by a characteristic grinding of gears when reverse gear is engaged, there may be air in the clutch hydraulic actuator. Remove it by pumping the drive