Drain the clutch fluid.
Remove the master cylinder by unscrewing the mounting bolts.
Remove the vacuum brake booster by unscrewing the mounting bolts.
Release the clamp and disconnect the clutch master cylinder reservoir tube from the clutch master cylinder.
Drain the liquid into a plastic container.
Disconnect the flexible hose from the clutch master cylinder.
Using the special tool, connect the flexible hose and tighten the fastening nut.
Connect the clutch master cylinder reservoir tube with clamp to the clutch master cylinder.
Connect the clutch master cylinder reservoir tube so that it is not bent.
Install the brake booster.
Install the brake master cylinder.
Bleed air from master cylinder.
Bleed air from the brake system.
After filling the master cylinder reservoir with clutch fluid, bleed the air from the clutch system.
Check and adjust the brake pedal height.
Check and adjust clutch pedal assembly.
Check for brake fluid leakage.
Check for clutch fluid leakage.
Check the fluid level in the clutch reservoir.
