Checking the continuity of the mirror adjustment switch

In the article, we will consider disassembly, removal, installation and adjustment of the car hood

Toyota Camry steering wheel and trim removal

We remove the steering wheel to remove the instrument panel and for other dismantling and assembly work

1MZ-FE engine head repair

Before removing the valves, remove the tappets and shims

Store tappets and shims in the order in which they were installed

Adjusting the parking brake actuator

To check the correct adjustment of the parking brake drive, press the parking brake pedal all the way - you should hear about 7-8 clicks of the ratchet device

The differential seal is replaced when oil leaks through the seal

 Installing the intake camshaft of the front head of the block Installing the intake camshaft of the front head of the engine block 1AZ-FE

Apply a coat of engine oil to the end thrust surfaces of the camshaft

The air filter inlet is divided into two chambers, the air intake control valve and the actuator are installed in one of the chambers

Adjusting and checking the headlights must be carried out on an equipped vehicle, with a fully filled fuel tank, a set of tools and a spare wheel

Checking the oil level should be carried out after 15,000 km of vehicle run