Cylinder head disassembly
Remove the oil pressure sensor
The traction control system automatically helps prevent front wheel slip when starting off and accelerating the vehicle on slippery road surfaces
If the car won't start
Simple checks
Before checking, be sure to perform the starting procedure and make sure that there is enough fuel
If the headlights or other electrical components are not working, check the fuses
The following types of automatic transmissions are used on the Camry: 1AZ, 2AZ-FE - U241E; 1MZ-FE-U140E
Replace the rear suspension arms in case of deformation or wear
Checking the electric lock on the front door on the driver's side
Check for signal continuity between the connector pins and the central locking switch in the positions shown in the table
The main criterion for the health of the engine power system is the fuel pressure in the fuel rail
We remove the steering column switch for replacement, as well as when replacing the steering column of the car
Replacing the cylinder head cover gasket
To complete the task, you will need tools: wrenches for 14, 13, socket heads for 10, 14, 19 and screwdrivers
The fuel module is removed to replace the elements of the fuel module, as well as when replacing the fuel tank