Remove the right front fender liner
Remove the air conditioning hose bracket bolt
Using a special tool, unscrew the 6 fastening nuts and disconnect the brake pipes from the pressure modulator (Fig. 1).
Disconnect the two connectors.
Fig. 2. Removing the pressure modulator
Unscrew the two bolts and two nuts and remove the modulator assembly (fig. 2)
Remove the two nuts and remove the modulator from the bracket.
Remove the two holders and three bushings from the modulator.
Installation is performed in the reverse order of removal.
After installation, fill the reservoir with brake fluid, bleed the brake system and check for leaks.
Checking is done using a special diagnostic tester DLC3.
