We remove the oil pump when overhauling the engine, when replacing the circuit and when repairing the pump itself
Before lifting the rear of the vehicle, engage first gear and chock the front wheels
Four molded gaskets are installed between the flanges of the cylinder head and the intake pipe
Remove the pump for repair or replacement if more than normal noise and coolant leaks occur during operation
You will need: power steering fluid, clean rag
Only add "Elf Renault Matic D2" fluid recommended by the manufacturer to the power steering reservoir
The immobilizer coil is put on a piece of pipe (welded to the steering column pipe) in which the ignition switch is installed
You will need a TORX T20 key.
Disconnect the wire from the negative terminal of the battery.
Remove the upper steering column cover
We remove the air filter for replacement, as well as for access to other parts and components of the power plant
Remove the steering column for replacement or repair
Checking the fuel pressure in the fuel rail of the engine is only possible with a pressure gauge with a set of adapters for connecting to the fuel pipeline
Bleeding (bleeding) the hydraulic system of the power steering is necessary after any work related to the depressurization of the system (replacement of the pump or pipelines)