Checking the kingpin and bushings for wear
The check is carried out with adjusted front wheel bearings
The pressure regulator is attached to the left side member of the frame
Removing the power window
Remove the door upholstery (see the article - Removing the door upholstery).
The piston of the 1st cylinder is set to the position of the top dead center (TDC) of the compression stroke so that when carrying out work related to the removal of the timing chains, the installation of the gas distribution phases is not disturbed
On the ZMZ-402 engine, before removing the filter, drain the oil from it by unscrewing the plug
Unscrew the emergency oil pressure switch at the bottom of the filter
If the position of the front wheels corresponds to a straight-line movement, and the steering wheel spokes are not horizontal, this indicates a violation of the adjusting angles of the wheels, the presence of defects in the steering or suspension
