We remove the lower front panel when removing the engine, replacing the oil cooler, replacing the engine cooling radiator

The car's on-board circuit (except for the starter circuit) is powered by two fuses

Design features of the brake master cylinder

The main brake cylinder, with two pistons 10 and 17 in series and a two-section reservoir 4 with a sensor 6 for an emergency drop in the brake fluid level, is attached to the cover of the vacuum booster

An external sign of wear on the valve stem seals is the short-term appearance of blue smoke from the exhaust pipe after starting the engine, as well as when braking the engine after a long drive under load

Checking and adjusting the wheel alignment is necessary to ensure good stability and controllability of the car, uniform tire wear during its operation

The ignition distributor with a built-in Hall sensor produces voltage pulses, which the switch converts into current pulses in the primary winding of the ignition coil