The car has three independent brake systems: working, spare and parking

Checking the kingpin and bushings for wear

The check is carried out with adjusted front wheel bearings

The pressure regulator is attached to the left side member of the frame

Removing the power window

Remove the door upholstery (see the article - Removing the door upholstery).

The piston of the 1st cylinder is set to the position of the top dead center (TDC) of the compression stroke so that when carrying out work related to the removal of the timing chains, the installation of the gas distribution phases is not disturbed

On the ZMZ-402 engine, before removing the filter, drain the oil from it by unscrewing the plug

Unscrew the emergency oil pressure switch at the bottom of the filter