Removing and installing the clutch master cylinder

Remove the master cylinder for replacement or repair in case of fluid leakage, incomplete clutch disengagement (may be caused by fluid leakage or worn cuffs), and also if the clutch is not fully engaged (due to clogging of the compensation hole or its blockage by a swollen cuff)

In a variant, ABS brakes are installed on the car

If the clutch does not fully disengage (“drives”) when the pedal is pressed all the way, which is accompanied by a characteristic grinding of gears when reverse gear is engaged, there may be air in the clutch hydraulic actuator. Remove it by pumping the drive

Let's consider replacing the right wheel bearing

Removing the front wheel drive (For removing and installing the front drive, see the article - "Removing and installing the front drive")

Depending on the vehicle configuration, various schemes and options for auxiliary unit drives can be used