To improve the appearance of the engine compartment, and to reduce noise from the engine, a decorative plastic casing (screen) is installed
This cover must be removed for most engine repairs and maintenance.
The decorative casing installed on the car is fixed with four rubber clips.
To remove the cover, use a screwdriver to pry off the edge of the retainer cap and remove the retainer from the hole in the cover by removing it from the bracket stud.
Unscrew and remove the oil filler cap
In the same way, remove the remaining three latches and remove the decorative casing (screen).
You can also remove the decorative cover without first removing the latches by pulling up on the edges of the cover.
But in this case, there is a chance that the latches will fly apart and then it will be difficult to find them.
Install the decorative cover in the reverse order of removal
