The main brake cylinder with a two-section reservoir and an emergency drop in brake fluid level sensor is attached to the vacuum booster
To prevent sudden failure of the brake system, carefully check the condition of all pipelines and hoses
The durability of the repaired engine largely depends on the bench run-in and the mode of its operation on the car for the first 6000 km of run
The ignition distributor with a built-in Hall sensor produces voltage pulses, which the switch converts into current pulses in the primary winding of the ignition coil
The ignition lock bracket is fixed to the steering column with two bolts, the heads of which are cut off at a certain tightening torque