If the position of the front wheels corresponds to a straight-line movement, and the steering wheel spokes are not horizontal, this indicates a violation of the adjusting angles of the wheels, the presence of defects in the steering or suspension
Repair of the cylinder head is carried out during general engine repairs and when replacing the cylinder head gasket.
Design features of the brake master cylinder
The main brake cylinder, with two pistons 10 and 17 in series and a two-section reservoir 4 with a sensor 6 for an emergency drop in the brake fluid level, is attached to the cover of the vacuum booster
The car is equipped with a windshield wiper 60.5205 or 70.5205 with an electric drive for two brushes
The wiper motor with a gearbox and a system of drive levers is located in the engine compartment under the lower lining of the front end
Usually, the head gasket is replaced with the following damage:
- - Gas breakthrough into the cooling system;
Before you begin troubleshooting any electrical circuit, carefully study the relevant diagram to understand its function as clearly as possible
