Toyota Camry Double Lock Electric Door Lock Test

Checking the electric lock on the passenger side front door

Check the operation of the electric drive of the passenger door lock in the positions indicated in the table

Connect the positive battery terminal to terminal 4 and the negative terminal to terminal 3

Make sure the latch is in the "LOCK" position.

Reverse the polarity of the connector pins

And make sure the lock latch is in the "UNLOCK" position.

If the operation of the actuator is not as described, replace the lock assembly.

Check for signal continuity between the terminals of the connector and the passenger side door lock switch in the positions shown in the table.

If the conductivity does not match the data in the table, replace the lock assembly.

Checking the electric lock on the front door on the driver's side

Check the operation of the driver's door lock electric drive in the positions indicated in the table.

Connect the positive battery terminal to the "2" terminal and the negative terminal to the "1" terminal, make sure that the lock latch has moved to the "LOCK" position.

Reverse the polarity of the connector pins and make sure the latch is in the "UNLOCK" position.

If the operation of the actuator is not as described, replace the lock assembly.

Check for signal continuity between the terminals of the connector and the door lock switch on the driver's side in the positions indicated in the table.

If the conductivity does not match the data in the table, replace the lock assembly.

Checking the electric lock of the rear right door

Check the operation of the rear right door lock electric drive in the positions indicated in the table.

Connect the positive battery terminal to the "2" terminal and the negative terminal to the "1" terminal, make sure that the lock latch has moved to the "LOCK" position

Reverse the polarity of the connector pins and make sure the latch is in the "UNLOCK" position.

If the operation of the actuator is not as described, replace the lock assembly.

Check for signal continuity between the terminals of the connector and the rear right door lock switch in the positions indicated in the table.

If the conductivity does not match the data in the table, replace the lock assembly.

Checking the electric lock of the rear left door

Check the operation of the rear left door lock electric drive in the positions indicated in the table.

Soy Connect the positive terminal of the battery to terminal "4" and the negative terminal to terminal "3", make sure that the latch of the lock has moved to the "LOCK" position.

Reverse the polarity of the connector pins and make sure the latch is in the "UNLOCK" position.

If the operation of the actuator is not as described, replace the lock assembly.

Check for continuity of the signal between the terminals of the connector and the rear left door lock switch in the positions indicated in the table.

If the conductivity does not match the data in the table, replace the lock assembly.