Usually, the front beam of the car is removed when the beam is deflected or twisted, as well as other defects that require removal of the beam
We work together on a viewing ditch
We hang out the front of the car and install two stands at least 700 mm high under the front ends of the frame side members.
Remove the wheels, shock absorbers and brake calipers of the front wheels.
With a “17” head, we unscrew the two bolts securing the lever to the steering knuckle on the left side of the car
Remove the lever together with the transverse link
With a “24” head, we unscrew the nuts of the stepladders, remove the stepladders and the spring cover (see the article - Removing, disassembling the spring and replacing its rubber-metal hinges).
Similarly, we disconnect the lever from the steering knuckle and remove the stepladders on the right side of the car.
Removing the bridge.
Install the front axle in the reverse order, while evenly tightening the nuts of the stepladders.
We lubricate the threads of the bolts for fastening the levers to the steering knuckle and the nuts of the stepladders with sealant.
