To remove the A-pillar upper trim, the sun visor must be removed
Removing sun visors
We lower the sun visor so that there is access to the bracket mounting screws
Remove the visor from the holder
Pry off the decorative plug with a screwdriver
Remove the decorative cap of the visor bracket fastener
We press the lock of the visor bracket to the body
Remove the sun visor
We also accurately remove the second visor.
Remove the lining of the front pillars, overcoming the resistance of the clamps.
To remove the rear trim of the A-pillar, remove the rear seat
Remove the rear trim of the body pillar, overcoming the resistance of the clamps
To remove the rear shelf, remove the additional brake light
Pry off the seat belt cover with a screwdriver
Remove the seat belt cover
Through the hole in the lining we pass the tongue of the lock and the lower fastening of the lock
Remove the rear shelf
We remove the upper trim of the rear pillar of the body, overcoming the resistance of the clamps
Remove the front sill lining by pulling it up
To remove the rear sill lining, turn out the piston core
Remove the piston from the hole
Remove the rear sill trim
Remove the lower trim of the A-pillar by pulling it up
Remove the lower part of the B-pillar trim by pulling it to the side
We press the latches of the upper part of the lining of the central pillar and move the lining to the side
Location of fasteners for fastening the upper part of the B-pillar trim
Press out the latch
Removing the seat belt buckle
We hook the lock tongue through the hole in the lining one by one
And the lower seat belt anchor, then remove the top of the B-pillar trim
Removing trunk lining
Turn the latch
Remove the rear light covers on the left and right sides of the body
Pry off the piston with a screwdriver
Removing the crepe caps removing the rear trunk liner from the holes in the body panel
Position of the caps on the rear trunk liner
Press the rear trim latches
Remove the rear trunk lining
Location of the fasteners for securing the rear trunk lining
We pry off with a screwdriver and remove the fasteners of the side trim of the trunk from the hole in the body
Remove the side trim of the trunk
We install all the parts in the reverse order, checking the latches and caps of the facings.
