We remove the backstage for repair or to replace the transmission control cables
To do the job, you will need tools: a 13 wrench, pliers, screwdrivers and grease
Disconnect the fasteners and set aside the exhaust system.
To do this, disconnect the intake pipe from the exhaust manifold, disconnect the suspension cushions of the system in the area of the converter and take the system to the side.
Removing the lining of the floor tunnel (article - Replacing the Renault Megan 2 center console )
Remove the soundproof cover
We unscrew the four bolts securing the backstage to the base of the body
Press out the latches
Having lowered the backstage through the opening in the base of the body, remove it from the car.
The yoke needs to be replaced completely, as the parts are not sold separately.
To lubricate the gear lever pivot, remove the three screws
Remove the backstage cover
We pry off the protective cover, and move it up the gear lever.
In case of difficult movement of the gear lever or creaking when shifting, you can not remove the link, but simply lubricate the lever hinge.
Install the backstage in reverse order.