Some vehicle configurations are equipped with headlight range height sensors
We carry out work on a lift or on a viewing ditch.
Disconnect the negative battery terminal
Removing the front headlight range height sensor
Disconnect the connector.
Remove the stopper and unscrew the bolt securing the front body height sensor (Fig. 1).
Installation
Install the sensor with the bracket on the vehicle.
Tighten to 8 Nm the front body height sensor mounting bolt.
Be sure to replace the stopper after each removal.
The front height sensor has different electronic characteristics from the rear height sensor, so it is very important not to mix them up.
The front height sensor has a yellow label.
Perform ECU calibration.
Adjust the headlights.
Removing and installing the rear headlight range height sensor
Withdrawal
Disconnect the connector.
Remove the stopper (fig. 2).
Remove the bolt securing the rear height sensor (Fig. 3).
Installation
Install the sensor with the bracket on the vehicle.
Tighten to 8 Nm the front body height sensor mounting bolt.
Be sure to replace the stopper after each removal.
The front height sensor has different electronic characteristics from the rear height sensor, so it is very important not to mix them up.
The rear height sensor has a green label.
Perform ECU calibration.
Adjust the headlights.