The ignition distributor with a built-in Hall sensor produces voltage pulses, which the switch converts into current pulses in the primary winding of the ignition coil

Remove the fan drive belt.

Remove the alternator drive belt.

Remove four screws 1, remove fan 2 and fan pulley 3

We replace the muffler and resonator in case of burnout, through corrosion or mechanical damage

An external sign of wear on the valve stem seals is the short-term appearance of blue smoke from the exhaust pipe after starting the engine, as well as when braking the engine after a long drive under load

The ZMZ-40524.10 engine is a modification of the ZMZ-40522.10 engine in order to meet Euro3 toxicity standards and increase its reliability and service life

Design features of the brake master cylinder

The main brake cylinder, with two pistons 10 and 17 in series and a two-section reservoir 4 with a sensor 6 for an emergency drop in the brake fluid level, is attached to the cover of the vacuum booster

The car has three independent brake systems: working, spare and parking

We replace the brake disc in case of cracks or severe scuffing on its surfaces, as well as when it is worn to a thickness of less than 19 mm.

Repair of the cylinder head is carried out during general engine repairs and when replacing the cylinder head gasket.

Replacing the throttle cable of ZMZ-40522, ZMZ-40524, ZMZ-406 engines

Disconnect the negative battery terminal.