We remove the electric fans of the radiator of the engine cooling system for repair or replacement
We prepare the car and install it on a lift or a viewing ditch
Disconnect the negative battery terminal
Remove the air filter as described in the article - "Removing and installing the air filter of the 2AZ-FE Toyota Camry engine"
Remove the battery
Draining the coolant
Loosen the clamp of the radiator inlet hose, squeezing the bent ears with pliers, move the clamp along the hose
And remove the hose from the radiator pipe
Disconnect the wiring harness of the right and left electric fans
Disconnect the three harness holders from the electric fan shroud and move the wiring harness to the side
Squeezing the tabs of the latch, we release the three fastenings of the casing of the electric fans to the upper radiator tank
Remove the casing with electric fans
Removing fan motors
Disconnect the block of wires, prying with a screwdriver, from the casing of the electric fans
Release the motor wiring harness from the holders on the casing
We unscrew the two mounting bolts and remove the heat shield of the electric motor
Unscrew the nut of the electric fan impeller
Remove it from the motor shaft
We unscrew the three mounting screws and remove the motor from the casing
Install the motor in reverse order
In the same way, remove the other electric motor
Install all parts in reverse order
